Abbott Accelerator a3600 Centrifuge Module tube loading algorithm, Inpeco SA P/N: FLX-202, with Firmware Versions: CM_1-7-0.H86 or xCMd_2-5-0.elf and CM_1-7-1.H86 or xCMd_2-5-1-849fad9.elf
Published May 13, 2020 · Recall initiated: April 7, 2020
Summary
FDA records medical device Class II recall Z-1888-2020, published May 13, 2020 and initiated April 7, 2020. Recalling firm: Inpeco S.A.; Status: Ongoing; Reported quantity: 23 units; Lot: Serial Numbers: ACP.357, ACP.388, ACP.396, ACP.397, ACP.399, ACP.400, ACP.402, ACP.404, ACP.405, ACP.407, ACP.408, ACP.409, ACP.410, ACP.412, ACP.413, ACP.416, ACP.417, ACP.418, ACP.419, ACP.420, ACP.421, ACP.422, ACP.423. Class II means possible temporary or medically reversible effects, or a remote probability of serious health consequences.
Status when published: Ongoing — openFDA updates weekly, so this field may not reflect the current status. Always confirm with the official notice.
What's the hazard
The FlexLab Centrifuge Module loading algorithm may lead to unbalanced loads which could damage the centrifuge.
What to do
Voluntary: Firm initiated · Letter
Get an email when a new FDA recall like this is published
Free. We only write when there's a new recall that matches. Unsubscribe in one click.
Recall details
- Manufacturer
- Inpeco S.A.
- Distributor
- Worldwide distribution including the following states: Ohio, New York, Virginia, Pennsylvania, Texas, Delaware, California, Florida, Kentucky, Tennessee, Maryland, Rhode Island, Alabama, Massachusetts, Connecticut, Minnesota, Alabama, Montana, Louisiana, New Jersey, Virginia, New Hampshire, Michigan, North Carolina, Washington, Iowa, New Mexico, Nebraska, and Missouri
- Lot
- Serial Numbers: ACP.357, ACP.388, ACP.396, ACP.397, ACP.399, ACP.400, ACP.402, ACP.404, ACP.405, ACP.407, ACP.408, ACP.409, ACP.410, ACP.412, ACP.413, ACP.416, ACP.417, ACP.418, ACP.419, ACP.420, ACP.421, ACP.422, ACP.423
- Risk classification
- Class II
- Area (FDA)
- device
- Country
- Switzerland
Related recalls
- FDAAccelerator a3600 Automation System with the Aliquoter Module (Inpeco P/N FLX-212) The FlexLab (akaNovember 18, 2020
- FDAAccelerator a3600 Automation System with Advia2120LAS Interface Module (P/N FLX-219-00, FLX-219-10), ImmunoCAPJune 3, 2020
- FDAInpeco FlexLab, ARCHITECT cSystem c8000/c16000 Interface Module, Part Numbers: FLX-208-00, FLX-208-10 -May 20, 2020
- FDAHEMASHIELD PLATINUM Woven Double Velour Vascular Graft-4 Branch, Product Code: M00202175930P0 - Product Usage:May 13, 2020
- FDAdaVinci XI Sureform 60 Reload, 60 mm black 6-Row 4.6 mm, Ref: 48360T-08 , UDI: 00886874113851, Rx only,May 13, 2020
- FDAFlexLab, Accelerator a3600 and Aptio Automation are modular systems designed to automate Pre-Analytical andNovember 23, 2016
Questions about this recall
Was Abbott Accelerator a3600 Centrifuge Module tube loading algorithm, Inpeco SA P/N: FLX-202, with Firmware Versions: CM_1-7-0.H86 or xCMd_2-5-0.elf and CM_1-7-1.H86 or xCMd_2-5-1-849fad9.elf recalled?
Yes. FDA published recall Z-1888-2020 on May 13, 2020. Reported hazard: The FlexLab Centrifuge Module loading algorithm may lead to unbalanced loads which could damage the centrifuge.
What should I do if I have this product?
Voluntary: Firm initiated · Letter