2010 Medtec Type Ii (Van) — Seats
Published February 16, 2011 · Recall initiated: February 14, 2011
Summary
NHTSA records recall 11V098000, published February 16, 2011 and initiated February 14, 2011. Recalling firm: Medtec Ambulance Corporation; 2010 Medtec Type Ii (Van) — Seats.
What's the hazard
MEDTEC IS RECALLING CERTAIN MODEL YEAR 2010 AMBULANCE TYPE II VANS FOR NOT COMPLYING WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS," AND FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." THE REAR FACING AMBULANCE ATTENDANT SEAT UTILIZES A STEEL FLOOR REINFORCEMENT PLATE ON THE BOTTOM SIDE OF THE ALUMINUM FLOOR SUBSTRUCTURE AND THE REINFORCEMENT PLATE WAS OMITTED IN SOME AMBULANCE BODIES.
What to do
DEALERS WILL INSTALL THE MISSING REINFORCEMENT PLATE UNDER THE FLOOR SUBSTRUCTURE FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING MARCH 2011. OWNERS MAY CONTACT MEDTEC TOLL-FREE AT 1-866-263-3832.
Get an email if MEDTEC has another recall
Free. We only write when there's a new recall that matches. Unsubscribe in one click.
Recall details
- Brand
- MEDTEC
- Model
- TYPE II (VAN)
- Manufacturer
- Medtec Ambulance Corporation
- Lot
- 2010 MEDTEC TYPE II (VAN)
- Risk classification
- V
- Country
- US
Related recalls
- NHTSA2010 Medtec Ambulance | 2009 Medtec Ambulance | 2011 Medtec Ambulance — SeatsDecember 4, 2012
- NHTSA2006 Diamond Coach Ps | 2008 Diamond Coach Vip | 2008 Diamond Coach Ibd | 2007 Diamond Coach Ibd | 2006February 17, 2011
- NHTSA2010 Starcraft Prodigy | 2009 Starcraft Prodigy | 2010 Starcraft Quest | 2011 Starcraft Quest | 2009 StarcraftFebruary 17, 2011
- NHTSA2009 Pierce Arrow Xt | 2008 Pierce Arrow Xt — Engine and engine coolingFebruary 16, 2011
- NHTSA2010 Winnebago Tour | 2010 Itasca Ellipse | 2011 Itasca Ellipse | 2011 Winnebago Tour — Equipment: other:February 16, 2011
- NHTSA2009 Medtec Type Ii (Van) | 2008 Medtec Type Ii (Van) | 2010 Medtec Type Ii (Van) | 2007 Medtec Type Ii (Van)October 25, 2010
Questions about this recall
Was 2010 Medtec Type Ii (Van) — Seats recalled?
Yes. NHTSA published recall 11V098000 on February 16, 2011. Reported hazard: MEDTEC IS RECALLING CERTAIN MODEL YEAR 2010 AMBULANCE TYPE II VANS FOR NOT COMPLYING WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "SEATING SYSTEMS," AND FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." THE REAR FACING AMBULANCE ATTENDANT SEAT UTILIZES A STEEL FLOOR REINFORCEMENT PLATE ON THE BOTTOM SIDE OF THE ALUMINUM FLOOR SUBSTRUCTURE AND THE REINFORCEMENT PLATE WAS OMITTED IN SOME AMBULANCE BODIES.
What should I do if I have this product?
DEALERS WILL INSTALL THE MISSING REINFORCEMENT PLATE UNDER THE FLOOR SUBSTRUCTURE FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING MARCH 2011. OWNERS MAY CONTACT MEDTEC TOLL-FREE AT 1-866-263-3832.
How do I know if my unit is part of the recall?
Compare your product details with the notice. Brand: MEDTEC. Model: TYPE II (VAN).