2011 Altec Ac35/38 Crane | 2010 Altec Ac35/38 Crane — Equipment
Published May 14, 2013 · Recall initiated: May 10, 2013
Summary
NHTSA records recall 13V193000, published May 14, 2013 and initiated May 10, 2013. Recalling firm: Altec Industries, Inc.; 2011 Altec Ac35/38 Crane | 2010 Altec Ac35/38 Crane — Equipment.
What's the hazard
Altec is recalling certain model year 2010-2011 AC35/38 cranes equipped with 31-55 foot telescopic jibs built between 2010 and 2011. The jib attachment bracket is not sufficient for loads that can occur when the fully extended jib is lifted off the ground.
What to do
Altec will notify owners and dealers will install jib bracket reinforcement kits. Dealers will also install a kit to repair any jib bracket that is damaged. The recall began on July 8, 2013. Owners may contact Altec at 1-877-462-5832. Altec's recall campaign number is CSN 576.
Get an email if ALTEC has another recall
Free. We only write when there's a new recall that matches. Unsubscribe in one click.
Recall details
- Brand
- ALTEC
- Model
- AC35/38 CRANE
- Manufacturer
- Altec Industries, Inc.
- Lot
- 2011 ALTEC AC35/38 CRANE | 2010 ALTEC AC35/38 CRANE
- Risk classification
- V
- Country
- US
Related recalls
- NHTSA2021 Altec Digger Derrick — Electrical system: wiringSeptember 25, 2026
- NHTSA2021 Altec Service Body | 2022 Altec Service Body | 2023 Altec Service Body — Equipment: emergency:August 27, 2026
- NHTSA2026 Altec Digger Derrick | 2025 Altec Digger Derrick | 2024 Altec Digger Derrick | 2023 Altec Digger DerrickAugust 21, 2026
- NHTSA2026 Altec At Series | 2025 Altec At Series | 2024 Altec At Series — Equipment: mechanical: boom/crane/ladder:July 17, 2026
- NHTSADorman Master Cylinder — EquipmentMay 14, 2013
- NHTSA2013 Subaru Outback | 2013 Subaru Legacy — Steering: columnMay 14, 2013
Questions about this recall
Was 2011 Altec Ac35/38 Crane | 2010 Altec Ac35/38 Crane — Equipment recalled?
Yes. NHTSA published recall 13V193000 on May 14, 2013. Reported hazard: Altec is recalling certain model year 2010-2011 AC35/38 cranes equipped with 31-55 foot telescopic jibs built between 2010 and 2011. The jib attachment bracket is not sufficient for loads that can occur when the fully extended jib is lifted off the ground.
What should I do if I have this product?
Altec will notify owners and dealers will install jib bracket reinforcement kits. Dealers will also install a kit to repair any jib bracket that is damaged. The recall began on July 8, 2013. Owners may contact Altec at 1-877-462-5832. Altec's recall campaign number is CSN 576.
How do I know if my unit is part of the recall?
Compare your product details with the notice. Brand: ALTEC. Model: AC35/38 CRANE.