2016 Terex Tlm | 2017 Terex Tlm — Equipment
Published September 18, 2019 · Recall initiated: September 17, 2019
Summary
NHTSA records recall 19V659000, published September 18, 2019 and initiated September 17, 2019. Recalling firm: Terex South Dakota, Inc.; 2016 Terex Tlm | 2017 Terex Tlm — Equipment.
What's the hazard
Terex South Dakota, Inc. (Terex) is recalling certain TLM aerial-device vehicles equipped with external holding valve blocks. The incorrect holding valve was installed on the upper boom cylinder base end. As a result, if the hose for the upper boom raise function should burst while at maximum load and maximum side reach, the boom may drift down.
What to do
Terex will notify owners, and dealers will replace the base end holding valve on the upper boom lift cylinder, free of charge. The recall began October 25, 2019. Owners may contact Terex customer service at 1-844-837-3948. Terex's number for this recall is SN675.
Get an email if TEREX has another recall
Free. We only write when there's a new recall that matches. Unsubscribe in one click.
Recall details
- Brand
- TEREX
- Model
- TLM
- Manufacturer
- Terex South Dakota, Inc.
- Lot
- 2016 TEREX TLM | 2017 TEREX TLM
- Risk classification
- V
- Country
- US
Related recalls
- NHTSA2024 Terex C5000 | 2025 Terex C5000 | 2026 Terex C5000 | 2019 Terex C6000 | 2020 Terex C6000 | 2021 TerexAugust 17, 2026
- NHTSATerex Pole Position Guide Arm Assembly Pin — EquipmentMarch 30, 2026
- NHTSA2019 Terex General 65 — EquipmentMarch 19, 2026
- NHTSA2025 Terex Tl-Series | 2025 Terex Hr40 — Equipment: mechanical: boom/crane/ladder: motor/hydraulic pumpJanuary 13, 2026
- NHTSA2017 Hyundai Translead Duralite Ht | 2018 Hyundai Translead Duralite Ht — StructureSeptember 18, 2019
- NHTSA2019 4-Star Trailer Horse Trailer — Suspension: multiple axleSeptember 18, 2019
Questions about this recall
Was 2016 Terex Tlm | 2017 Terex Tlm — Equipment recalled?
Yes. NHTSA published recall 19V659000 on September 18, 2019. Reported hazard: Terex South Dakota, Inc. (Terex) is recalling certain TLM aerial-device vehicles equipped with external holding valve blocks. The incorrect holding valve was installed on the upper boom cylinder base end. As a result, if the hose for the upper boom raise function should burst while at maximum load and maximum side reach, the boom may drift down.
What should I do if I have this product?
Terex will notify owners, and dealers will replace the base end holding valve on the upper boom lift cylinder, free of charge. The recall began October 25, 2019. Owners may contact Terex customer service at 1-844-837-3948. Terex's number for this recall is SN675.
How do I know if my unit is part of the recall?
Compare your product details with the notice. Brand: TEREX. Model: TLM.