Trochar Scalpel Instrument (Surgical Punch) OrthoPediatrics intramedullary rods (nails) are generally rod-shaped devices, with screw holes at either end for fixation to bone. This device is intended to be inserted into the medullary canal of the femur for fixation of fractures by aligning and stabilizing the bone fragments. Additional stabilization may be realized by installing transverse screws through holes in the rod. These devices are made of medical grade stainless steel. The OrthoPediatrics PediNail" system is used for pediatric and small stature adult patients as indicated to stabilize fractures of the femoral shaft; subtrochanteric fractures; ipsilateral neck/shaft fractures; prophylactic nailing of impending pathologic fractures; nonunions and malunions; fixation of femurs that have been surgically prepared (osteotomy) for correction of deformity.
Published November 14, 2012 · Recall initiated: September 13, 2012
Summary
FDA records medical device Class II recall Z-0207-2013, published November 14, 2012 and initiated September 13, 2012. Recalling firm: OrthoPediatrics Corp; Status: Terminated; Reported quantity: 78; Lot: Part number: 01-1500-9014 and Lot #'s 1466707 and 1466710. Class II means possible temporary or medically reversible effects, or a remote probability of serious health consequences.
Status when published: Terminated — openFDA updates weekly, so this field may not reflect the current status. Always confirm with the official notice.
What's the hazard
A complaint received from sales representative that a replenishment instrument was too short. Upon investigation, it has been determined that the device was not manufactured to design specifications and will not function as intended.
What to do
Voluntary: Firm initiated · Two or more of the following: Email, Fax, Letter, Press Release, Telephone, Visit
Get an email when a new FDA recall like this is published
Free. We only write when there's a new recall that matches. Unsubscribe in one click.
Recall details
- Manufacturer
- OrthoPediatrics Corp
- Distributor
- Nationwide Distribution including AL, IL, NY, FL, TX, MI, KY, NC, CO, and GA.
- Lot
- Part number: 01-1500-9014 and Lot #'s 1466707 and 1466710
- Risk classification
- Class II
- Area (FDA)
- device
- Country
- United States
Related recalls
- FDAOrthopedics 6.0MM ROD, COCR, SINGLE HEX, 500MM LENGTH-The RESPONSE" 5.5/6.0 Spine System is intended forAugust 5, 2020
- FDAOrthoPediatrics ACL Reconstruction System ShieldLoc 7mm implant component model number 10-1008-4070 - ProductJuly 15, 2020
- FDAModel No. 01-1503-0032 (Adolescent Nail Attachment Bolt). Component of the Pediatric Nailing Platform. ProductNovember 6, 2019
- FDAResponse BandLoc 5.5/6.0 Tensioner Instrument The Tensioner Instrument (01-1102-1000) is utilized to allow theJune 14, 2017
- FDAPinnacle3 VCC P/N 4598 001 41341 REV A, Philips Medical Systems (Cleveland), Inc., Fitchburg, WI. Pinnacle3November 14, 2012
- FDASechrist Monoplace Hyperbaric Chamber with Electronic Control Module Model 3300E/ER The Hyperbaric Chamber isNovember 14, 2012
Questions about this recall
Was Trochar Scalpel Instrument (Surgical Punch) OrthoPediatrics intramedullary rods (nails) are generally rod-shaped devices, with screw holes at either end for fixation to bone. This device is intended to be inserted into the medullary canal of the femur for fixation of fractures by aligning and stabilizing the bone fragments. Additional stabilization may be realized by installing transverse screws through holes in the rod. These devices are made of medical grade stainless steel. The OrthoPediatrics PediNail" system is used for pediatric and small stature adult patients as indicated to stabilize fractures of the femoral shaft; subtrochanteric fractures; ipsilateral neck/shaft fractures; prophylactic nailing of impending pathologic fractures; nonunions and malunions; fixation of femurs that have been surgically prepared (osteotomy) for correction of deformity. recalled?
Yes. FDA published recall Z-0207-2013 on November 14, 2012. Reported hazard: A complaint received from sales representative that a replenishment instrument was too short. Upon investigation, it has been determined that the device was not manufactured to design specifications and will not function as intended.
What should I do if I have this product?
Voluntary: Firm initiated · Two or more of the following: Email, Fax, Letter, Press Release, Telephone, Visit