Back to search
FDAFDA · Food and drugs·Recall number Z-0781-2013

Synthes(R) Spine Vectra, Vectra-T and Vectra-One Anterior Cervical Plating for Spinal Fusion - 2.5mm Drill Bit, graduated 12mm - 26mm adjustable depth, Part Number 03.613.011. Synthes Vectra System, Synthes Vectra-One System and Synthes Vectra-T System is intended for anterior plate and screw fixation of the cervical spine (C2-C7).

Published February 13, 2013 · Recall initiated: August 6, 2012

Summary

FDA records medical device Class II recall Z-0781-2013, published February 13, 2013 and initiated August 6, 2012. Recalling firm: Synthes USA HQ, Inc.; Status: Terminated; Reported quantity: 63; Lot: 2.5mm Drill Bit, graduated 12mm - 26mm adjustable depth, Part Number 03.613.011 - Lots 5443576, 5522810, 5537042, 5557902. Class II means possible temporary or medically reversible effects, or a remote probability of serious health consequences.

Status when published: Terminated — openFDA updates weekly, so this field may not reflect the current status. Always confirm with the official notice.

What's the hazard

Although the reported incidence is low, there is the potential for the drill stop to slip on the drill bit resulting in an adverse event.

What to do

Voluntary: Firm initiated · Letter

Get an email when a new FDA recall like this is published

Free. We only write when there's a new recall that matches. Unsubscribe in one click.

Recall details

Manufacturer
Synthes USA HQ, Inc.
Distributor
Nationwide Distribution-including Puerto Rico and the states of AK, AL, AR, AZ, CA, CO, CT, DC, DE, FL, GA, HI, IA, ID, IL, IN, KS, KY, LA, MA, MD, ME, MI, MN, MO, MS, MT, NC, ND, NE, NH, NJ, NM, NV, NY, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VA, VT, WA, WI, WV and WY.
Lot
2.5mm Drill Bit, graduated 12mm - 26mm adjustable depth, Part Number 03.613.011 - Lots 5443576, 5522810, 5537042, 5557902
Risk classification
Class II
Area (FDA)
device
Country
United States

Related recalls

Questions about this recall

Was Synthes(R) Spine Vectra, Vectra-T and Vectra-One Anterior Cervical Plating for Spinal Fusion - 2.5mm Drill Bit, graduated 12mm - 26mm adjustable depth, Part Number 03.613.011. Synthes Vectra System, Synthes Vectra-One System and Synthes Vectra-T System is intended for anterior plate and screw fixation of the cervical spine (C2-C7). recalled?

Yes. FDA published recall Z-0781-2013 on February 13, 2013. Reported hazard: Although the reported incidence is low, there is the potential for the drill stop to slip on the drill bit resulting in an adverse event.

What should I do if I have this product?

Voluntary: Firm initiated · Letter