Scubapro® MK 20 First Stage Regulators
Publicado el 2 de octubre de 2006
Resumen
CPSC registra el retiro 07501, publicado el 2 de octubre de 2006. Empresa responsable: Scubapro® USA, of El Cajon, Calif.; Unidades reportadas: About 48,500 units.
Qué peligro representa
Over-tightening of the Yoke or Din retainer during annual servicing of these regulators could result in a stress crack and failure of the regulator. If this occurs during a dive, air supply could be interrupted, posing a drowning hazard.
Qué hacer
Scubapro® USA has been providing a service upgrade kit via the authorized dealer network since May 2005 which contains a Yoke or Din retainer that prohibits over-tightening during annual service. Consumers can easily identify if the service upgrade has been completed by counting the vents on the plastic saddle located on the regulator. If the service upgrade has not been completed, the consumer should bring the regulator to any authorized Scubapro® dealer to have the service upgrade completed free of charge.
Recibe un correo si Scubapro® USA vuelve a tener un retiro
Gratis. Solo te escribimos cuando hay un retiro nuevo que coincide. Te das de baja con un clic.
Detalles del retiro
- Marca
- Scubapro® USA, of El Cajon, Calif.
- Fabricante
- Scubapro® USA, of El Cajon, Calif.
- Distribuidor
- Authorized Scubapro® dealers nationwide from January 1996 through December 2001 for about $260.
- País
- US
Retiros relacionados
- CPSCTwo-Stage Compact Snow Throwers5 de octubre de 2006
- CPSCOutdoor Gas Fire Pits5 de octubre de 2006
- CPSCFreeMotion Cable Cross and Dual Cable Cross Exercise Machines3 de octubre de 2006
- CPSCRechargeable lithium-ion batteries used in ThinkPad notebook computers28 de septiembre de 2006
- CPSC2005 R2.5 Model Carbon Fiber Bicycles and Bicycle Frames28 de septiembre de 2006
- CPSCKawasaki MULE utility vehicles27 de septiembre de 2006
Preguntas sobre este retiro
¿Scubapro® MK 20 First Stage Regulators fue retirado del mercado?
Sí. CPSC publicó el retiro 07501 el 2 de octubre de 2006. Peligro reportado: Over-tightening of the Yoke or Din retainer during annual servicing of these regulators could result in a stress crack and failure of the regulator. If this occurs during a dive, air supply could be interrupted, posing a drowning hazard.
¿Qué debo hacer si tengo este producto?
Scubapro® USA has been providing a service upgrade kit via the authorized dealer network since May 2005 which contains a Yoke or Din retainer that prohibits over-tightening during annual service. Consumers can easily identify if the service upgrade has been completed by counting the vents on the plastic saddle located on the regulator. If the service upgrade has not been completed, the consumer should bring the regulator to any authorized Scubapro® dealer to have the service upgrade completed free of charge.
¿Cómo sé si mi unidad está incluida en el retiro?
Compara los datos de tu producto con los del aviso. Marca: Scubapro® USA, of El Cajon, Calif..