Volver al buscador
CPSCCPSC · Productos de consumo·N.º oficial 07507

K-GUARD®, SENTRY® and FLAG FIRE® Model Fire Extinguishers

Publicado el 13 de noviembre de 2006

Resumen

CPSC registra el retiro 07507, publicado el 13 de noviembre de 2006. Empresa responsable: Ansul Incorporated, of Marinette, Wis.; Unidades reportadas: About 154,000.

Qué peligro representa

If the fire extinguisher is dropped horizontally from a height of approximately 2 to 3 feet, the pick-up tube could crack at the threads between the pick-up tube adaptor and the stainless steel tube. If a pick-up tube is cracked, the extinguisher can fail to discharge properly when activated, which can put users at risk during a fire.

Qué hacer

Pick-up tube replacements will be performed during routine annual maintenance. The pick-up tube assembly is inside the extinguisher and cannot be visually inspected without de-pressurizing and disassembling the extinguisher. This work should only be done by an authorized ANSUL® distributor. Owners concerned about an extinguisher prior to the scheduled maintenance, due to signs of physical damage such as dents or scratches, should contact their authorized ANSUL® distributor to request a free replacement.

Recibe un correo si Ansul Incorporated vuelve a tener un retiro

Gratis. Solo te escribimos cuando hay un retiro nuevo que coincide. Te das de baja con un clic.

Detalles del retiro

Marca
Ansul Incorporated, of Marinette, Wis.
Fabricante
Ansul Incorporated, of Marinette, Wis.
Distribuidor
Ansul Incorporated, through its authorized fire equipment distributors, from May 2003 through September 2005. Extinguishers were sold by distributors to their end users for about $150 to $225 each for the kitchen units and for about $100 each for the water units.
País
US

Retiros relacionados

Preguntas sobre este retiro

¿K-GUARD®, SENTRY® and FLAG FIRE® Model Fire Extinguishers fue retirado del mercado?

Sí. CPSC publicó el retiro 07507 el 13 de noviembre de 2006. Peligro reportado: If the fire extinguisher is dropped horizontally from a height of approximately 2 to 3 feet, the pick-up tube could crack at the threads between the pick-up tube adaptor and the stainless steel tube. If a pick-up tube is cracked, the extinguisher can fail to discharge properly when activated, which can put users at risk during a fire.

¿Qué debo hacer si tengo este producto?

Pick-up tube replacements will be performed during routine annual maintenance. The pick-up tube assembly is inside the extinguisher and cannot be visually inspected without de-pressurizing and disassembling the extinguisher. This work should only be done by an authorized ANSUL® distributor. Owners concerned about an extinguisher prior to the scheduled maintenance, due to signs of physical damage such as dents or scratches, should contact their authorized ANSUL® distributor to request a free replacement.

¿Cómo sé si mi unidad está incluida en el retiro?

Compara los datos de tu producto con los del aviso. Marca: Ansul Incorporated, of Marinette, Wis..

Ver aviso oficial de CPSC(abre en cpsc.gov)