DuraTech Anchor Plate with Damper and DuraChimney II Anchor Plate with Damper
Publicado el 23 de marzo de 2010
Resumen
CPSC registra el retiro 10176, publicado el 23 de marzo de 2010. Empresa responsable: Simpson Dura-Vent Company Inc., of Vacaville, Calif.; Unidades reportadas: About 500.
Qué peligro representa
When the consumer attempts to open/close the damper, it can become stuck in its current position. In addition, some of the dampers were assembled backwards and are set to the closed position when the consumer attempts to open the damper. Both pose risk of carbon monoxide poisoning to the consumer.
Qué hacer
Consumers should ensure that their damper is in the open position when the fireplace is in use. Consumers or distributors with defective fireplace dampers should contact Dura-Vent to schedule a free repair. The remaining unlocated recalled dampers were distributed in Washington, California, and Colorado. Consumers and distributors whose dampers were previously inspected and repaired do not need to schedule an additional inspection.
Recibe un correo si Simpson Dura-Vent vuelve a tener un retiro
Gratis. Solo te escribimos cuando hay un retiro nuevo que coincide. Te das de baja con un clic.
Detalles del retiro
- Marca
- Simpson Dura-Vent Company Inc., of Vacaville, Calif.
- Fabricante
- Simpson Dura-Vent Company Inc., of Vacaville, Calif.
- Distribuidor
- Dura-Vent distributors to fireplace/chimney contractors and by installers to home builders nationwide from January 2007 through May 2008 for between $100 to $150, depending on the model and size.
- País
- US
Retiros relacionados
- CPSCInfantino "SlingRider" and "Wendy Bellissimo" infant slings24 de marzo de 2010
- CPSCVentus Ltd™ and Ventus Team™ Bicycle Aerobars23 de marzo de 2010
- CPSCNiles ZR-6 MultiZone Receivers23 de marzo de 2010
- CPSCFlower and Insect Painted Wooden Beads23 de marzo de 2010
- CPSCBicycle Bells18 de marzo de 2010
- CPSCDayNa Decker Botanika Candles18 de marzo de 2010
Preguntas sobre este retiro
¿DuraTech Anchor Plate with Damper and DuraChimney II Anchor Plate with Damper fue retirado del mercado?
Sí. CPSC publicó el retiro 10176 el 23 de marzo de 2010. Peligro reportado: When the consumer attempts to open/close the damper, it can become stuck in its current position. In addition, some of the dampers were assembled backwards and are set to the closed position when the consumer attempts to open the damper. Both pose risk of carbon monoxide poisoning to the consumer.
¿Qué debo hacer si tengo este producto?
Consumers should ensure that their damper is in the open position when the fireplace is in use. Consumers or distributors with defective fireplace dampers should contact Dura-Vent to schedule a free repair. The remaining unlocated recalled dampers were distributed in Washington, California, and Colorado. Consumers and distributors whose dampers were previously inspected and repaired do not need to schedule an additional inspection.
¿Cómo sé si mi unidad está incluida en el retiro?
Compara los datos de tu producto con los del aviso. Marca: Simpson Dura-Vent Company Inc., of Vacaville, Calif..