2010 Kenworth T2000 | 2010 Kenworth T800 | 2010 Kenworth T660 | 2010 Kenworth W900 — Suspensión: rear: axle: spindle
Publicado el 4 de mayo de 2010 · Inicio del retiro: 4 de mayo de 2010
Resumen
NHTSA registra el retiro 10V185000, publicado el 4 de mayo de 2010. Empresa responsable: PACCAR Incorporated; 2010 Kenworth T2000 | 2010 Kenworth T800 | 2010 Kenworth T660 | 2010 Kenworth W900 — Suspensión: rear: axle: spindle.
Qué peligro representa
KENWORTH IS RECALLING CERTAIN MODEL YEAR 2010 T2000, T660, T800 AND W900 VEHICLES MANUFACTURED BETWEEN JULY 30, 2009 AND SEPTEMBER 18, 2009. THE REAR AXLE OUTER END HUB MAY HAVE NOT BEEN PRIMED WITH OIL PROPERLY DURING THE REAR AXLE INSTALLATION PROCESS. POTENTIAL LACK OF OIL MAY CAUSE THE OUTER END BEARING TO HEAT UP AND/OR SEIZE, POSSIBLY RESULTING IN THE OVERHEATING OF THE WHEEL END.
Qué hacer
DEALERS WILL REPLACE THE BEARINGS, SEALS AND WILL ADD OIL TO THE OUTER END HUB AS WELL AS INSPECT RACES AND AXLE HOUSING FOR DAMAGE AND REPLACING AS NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 24, 2010. OWNERS MAY CONTACT KENWORTH AT 425-828-5440.
Recibe un correo si KENWORTH vuelve a tener un retiro
Gratis. Solo te escribimos cuando hay un retiro nuevo que coincide. Te das de baja con un clic.
Detalles del retiro
- Marca
- KENWORTH
- Modelo
- T2000
- Fabricante
- PACCAR Incorporated
- Lote
- 2010 KENWORTH T2000 | 2010 KENWORTH T800 | 2010 KENWORTH T660 | 2010 KENWORTH W900
- Clasificación de riesgo
- V
- País
- US
Retiros relacionados
- NHTSA2027 Kenworth T880 | 2027 Kenworth W990 | 2027 Kenworth T280 | 2027 Kenworth T480 | 2027 Peterbilt 536 | 202728 de julio de 2026
- NHTSA2024 Kenworth T680 | 2025 Kenworth T680 | 2026 Kenworth T680 | 2024 Kenworth T880 | 2025 Kenworth T880 | 20263 de septiembre de 2025
- NHTSA2023 Kenworth T680 | 2023 Peterbilt 579 | 2023 Peterbilt 520 | 2022 Kenworth T680 — Sistema eléctrico: sistema25 de marzo de 2025
- NHTSA2025 Kenworth K270 | 2024 Peterbilt 220 | 2025 Peterbilt 220 | 2024 Kenworth K370 | 2025 Kenworth K370 | 202425 de marzo de 2025
- NHTSA2010 Brp Sea-Doo Advanced Tec — Trailer hitches5 de mayo de 2010
- NHTSAArvinmeritor Axle Assembly — Tren motriz: axle assembly4 de mayo de 2010
Preguntas sobre este retiro
¿2010 Kenworth T2000 | 2010 Kenworth T800 | 2010 Kenworth T660 | 2010 Kenworth W900 — Suspensión: rear: axle: spindle fue retirado del mercado?
Sí. NHTSA publicó el retiro 10V185000 el 4 de mayo de 2010. Peligro reportado: KENWORTH IS RECALLING CERTAIN MODEL YEAR 2010 T2000, T660, T800 AND W900 VEHICLES MANUFACTURED BETWEEN JULY 30, 2009 AND SEPTEMBER 18, 2009. THE REAR AXLE OUTER END HUB MAY HAVE NOT BEEN PRIMED WITH OIL PROPERLY DURING THE REAR AXLE INSTALLATION PROCESS. POTENTIAL LACK OF OIL MAY CAUSE THE OUTER END BEARING TO HEAT UP AND/OR SEIZE, POSSIBLY RESULTING IN THE OVERHEATING OF THE WHEEL END.
¿Qué debo hacer si tengo este producto?
DEALERS WILL REPLACE THE BEARINGS, SEALS AND WILL ADD OIL TO THE OUTER END HUB AS WELL AS INSPECT RACES AND AXLE HOUSING FOR DAMAGE AND REPLACING AS NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 24, 2010. OWNERS MAY CONTACT KENWORTH AT 425-828-5440.
¿Cómo sé si mi unidad está incluida en el retiro?
Compara los datos de tu producto con los del aviso. Marca: KENWORTH. Modelo: T2000.