Volver al buscador
NHTSANHTSA · Vehículos·N.º oficial 11V372000

2012 International Workstar — Dirección: gear box: shaft pitman

Publicado el 25 de julio de 2011 · Inicio del retiro: 21 de julio de 2011

Resumen

NHTSA registra el retiro 11V372000, publicado el 25 de julio de 2011 e iniciado el 21 de julio de 2011. Empresa responsable: International Motors, LLC; 2012 International Workstar — Dirección: gear box: shaft pitman.

Descargar PDFPlanes de pago

Qué peligro representa

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012 INTERNATIONAL WORKSTAR COMMERCIAL TRUCKS MANUFACTURED FROM FEBRUARY 7, 2011, THROUGH JUNE 7, 2011, AND BUILT WITH DUAL STEERING GEAR FEATURE CODES 05PTB, 05PTE, 05PUA, 05PUB, 05PUC, 05PUD, 05PUE, OR 05PUH. THE FASTENER THAT ATTACHES THE PITMAN ARM TO THE RIGHT SIDE STEERING GEAR MAY NOT HAVE BEEN TIGHTENED TO ITS SPECIFIED TORQUE, OR THE LOCKING FEATURE ASSOCIATED WITH THE FASTENER MAY NOT HAVE BEEN PROPERLY INSTALLED. AN UNDER TORQUE CONDITION AND/OR MISSING LOCKING FEATURE MAY CAUSE A LOOSE CONNECTION POSSIBLY ALLOWING THE PITMAN ARM TO SEPARATE FROM THE STEERING GEAR RESULTING IN LOSS OF STEERING CONTROL.

Qué hacer

DEALERS WILL INSPECT THE PITMAN ARM/STEERING GEAR CONNECTION, AND EITHER THE CONNECTING FASTENER WILL BE TIGHTENED TO THE CORRECT ASSEMBLY TORQUE OR THE PITMAN ARM WILL BE REPLACED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE AUGUST 19, 2011. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

Recibe un correo si INTERNATIONAL vuelve a tener un retiro

Gratis. Solo te escribimos cuando hay un retiro nuevo que coincide. Te das de baja con un clic.

Detalles del retiro

Marca
INTERNATIONAL
Modelo
WORKSTAR
Fabricante
International Motors, LLC
Lote
2012 INTERNATIONAL WORKSTAR
Clasificación de riesgo
V
País
US

Retiros relacionados

Preguntas sobre este retiro

¿2012 International Workstar — Dirección: gear box: shaft pitman fue retirado del mercado?

Sí. NHTSA publicó el retiro 11V372000 el 25 de julio de 2011. Peligro reportado: NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012 INTERNATIONAL WORKSTAR COMMERCIAL TRUCKS MANUFACTURED FROM FEBRUARY 7, 2011, THROUGH JUNE 7, 2011, AND BUILT WITH DUAL STEERING GEAR FEATURE CODES 05PTB, 05PTE, 05PUA, 05PUB, 05PUC, 05PUD, 05PUE, OR 05PUH. THE FASTENER THAT ATTACHES THE PITMAN ARM TO THE RIGHT SIDE STEERING GEAR MAY NOT HAVE BEEN TIGHTENED TO ITS SPECIFIED TORQUE, OR THE LOCKING FEATURE ASSOCIATED WITH THE FASTENER MAY NOT HAVE BEEN PROPERLY INSTALLED. AN UNDER TORQUE CONDITION AND/OR MISSING LOCKING FEATURE MAY CAUSE A LOOSE CONNECTION POSSIBLY ALLOWING THE PITMAN ARM TO SEPARATE FROM THE STEERING GEAR RESULTING IN LOSS OF STEERING CONTROL.

¿Qué debo hacer si tengo este producto?

DEALERS WILL INSPECT THE PITMAN ARM/STEERING GEAR CONNECTION, AND EITHER THE CONNECTING FASTENER WILL BE TIGHTENED TO THE CORRECT ASSEMBLY TORQUE OR THE PITMAN ARM WILL BE REPLACED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE AUGUST 19, 2011. OWNERS MAY CONTACT NAVISTAR AT 1-800-448-7825.

¿Cómo sé si mi unidad está incluida en el retiro?

Compara los datos de tu producto con los del aviso. Marca: INTERNATIONAL. Modelo: WORKSTAR.

Ver aviso oficial de NHTSA(abre en nhtsa.gov)