Volver al buscador
NHTSANHTSA · Vehículos·N.º oficial 14V222000

2012 Gillig Low Floor | 2014 Gillig Low Floor | 2013 Gillig Low Floor — Sistema eléctrico: wiring

Publicado el 29 de abril de 2014 · Inicio del retiro: 25 de abril de 2014

Resumen

NHTSA registra el retiro 14V222000, publicado el 29 de abril de 2014 e iniciado el 25 de abril de 2014. Empresa responsable: Gillig, LLC; 2012 Gillig Low Floor | 2014 Gillig Low Floor | 2013 Gillig Low Floor — Sistema eléctrico: wiring.

Qué peligro representa

Gillig LLC (Gillig) is recalling certain model year 2012-2014 Lowfloor transit buses manufactured October 15, 2012, through March 26, 2014, and equipped with electrical harnesses with overmolded J1939 connectors and non-insulated drain wires. The harnesses do not have heat shrink tubing on the drain wire and the overmold may not have sufficient resistance to water or corrosive chemical entry to the connectors.

Qué hacer

Gillig will notify owners, and dealers will replace the overmold connector, and install heat shrink tubing on the connector/cable junction, free of charge. The recall began in June 2014. Owners may contact Gillig customer service at 1-800-735-1500.

Recibe un correo si GILLIG vuelve a tener un retiro

Gratis. Solo te escribimos cuando hay un retiro nuevo que coincide. Te das de baja con un clic.

Detalles del retiro

Marca
GILLIG
Modelo
LOW FLOOR
Fabricante
Gillig, LLC
Lote
2012 GILLIG LOW FLOOR | 2014 GILLIG LOW FLOOR | 2013 GILLIG LOW FLOOR
Clasificación de riesgo
V
País
US

Retiros relacionados

Preguntas sobre este retiro

¿2012 Gillig Low Floor | 2014 Gillig Low Floor | 2013 Gillig Low Floor — Sistema eléctrico: wiring fue retirado del mercado?

Sí. NHTSA publicó el retiro 14V222000 el 29 de abril de 2014. Peligro reportado: Gillig LLC (Gillig) is recalling certain model year 2012-2014 Lowfloor transit buses manufactured October 15, 2012, through March 26, 2014, and equipped with electrical harnesses with overmolded J1939 connectors and non-insulated drain wires. The harnesses do not have heat shrink tubing on the drain wire and the overmold may not have sufficient resistance to water or corrosive chemical entry to the connectors.

¿Qué debo hacer si tengo este producto?

Gillig will notify owners, and dealers will replace the overmold connector, and install heat shrink tubing on the connector/cable junction, free of charge. The recall began in June 2014. Owners may contact Gillig customer service at 1-800-735-1500.

¿Cómo sé si mi unidad está incluida en el retiro?

Compara los datos de tu producto con los del aviso. Marca: GILLIG. Modelo: LOW FLOOR.

Ver aviso oficial de NHTSA(abre en nhtsa.gov)