Volver al buscador
NHTSANHTSA · Vehículos·N.º oficial 18V706000

2018 Altec Aerial Device | 2017 Altec Aerial Device | 2017 Altec Digger Derrick | 2018 Altec Digger Derrick — Estructura

Publicado el 15 de octubre de 2018 · Inicio del retiro: 9 de octubre de 2018

Resumen

NHTSA registra el retiro 18V706000, publicado el 15 de octubre de 2018 e iniciado el 9 de octubre de 2018. Empresa responsable: Altec Industries, Inc.; 2018 Altec Aerial Device | 2017 Altec Aerial Device | 2017 Altec Digger Derrick | 2018 Altec Digger Derrick — Estructura.

Qué peligro representa

Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LR7, L42A and AT37-G TDA58 aerial devices and DB37, DL/DMB D2/3/4B, and DMB digger derricks, equipped with fiberglass platforms. The step on the outside of the fiberglass platform can break off during normal use.

Qué hacer

Altec will notify owners, and dealers will inspect the platform step and replace the platform if the step has separated from the platform and add a platform step reinforcing kit, free of charge. The recall began December 3, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 695.

Recibe un correo si ALTEC vuelve a tener un retiro

Gratis. Solo te escribimos cuando hay un retiro nuevo que coincide. Te das de baja con un clic.

Detalles del retiro

Marca
ALTEC
Modelo
AERIAL DEVICE
Fabricante
Altec Industries, Inc.
Lote
2018 ALTEC AERIAL DEVICE | 2017 ALTEC AERIAL DEVICE | 2017 ALTEC DIGGER DERRICK | 2018 ALTEC DIGGER DERRICK
Clasificación de riesgo
V
País
US

Retiros relacionados

Preguntas sobre este retiro

¿2018 Altec Aerial Device | 2017 Altec Aerial Device | 2017 Altec Digger Derrick | 2018 Altec Digger Derrick — Estructura fue retirado del mercado?

Sí. NHTSA publicó el retiro 18V706000 el 15 de octubre de 2018. Peligro reportado: Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LR7, L42A and AT37-G TDA58 aerial devices and DB37, DL/DMB D2/3/4B, and DMB digger derricks, equipped with fiberglass platforms. The step on the outside of the fiberglass platform can break off during normal use.

¿Qué debo hacer si tengo este producto?

Altec will notify owners, and dealers will inspect the platform step and replace the platform if the step has separated from the platform and add a platform step reinforcing kit, free of charge. The recall began December 3, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 695.

¿Cómo sé si mi unidad está incluida en el retiro?

Compara los datos de tu producto con los del aviso. Marca: ALTEC. Modelo: AERIAL DEVICE.

Ver aviso oficial de NHTSA(abre en nhtsa.gov)